SWIVEL JOINTS

Swivel Joints (1" to 6") are manufactured both for standard service & sour service.

Long Sweep Swivel Joints are designed generally from 6,000 PSI CWP to 20,000 PSI CWP, both for standard and sour service, and ensure better flow characteristics.

Smooth and round bore design keeps pressure drop low and minimizes turbulence.

Style of swivels available:

1. STYLE 10

Three Swivels with two elbows

2. STYLE 20

Single Swivel coupling

3. STYLE 30

Single Swivel with one elbow

4. STYLE 40

Single Swivel with two elbows

5. STYLE 50

Two Swivels with two elbows

6. STYLE 60

Two Swivels with one elbow

7. STYLE 70

Two Swivels with three elbows

8. STYLE 80

Three Swivels with three elbows

Features

Swivel Joints are made from carbon steel and low alloy steel and are specially heat treated for controlled hardness

1. All union ends are interchangeable with other manufacturers adhering to industry standards. All Long Sweep Swivel Joints-Jar- sour service have union ends of corresponding pressure rating

2. Swivel Joints for sour service are provided with snap rings to assure high load bearing capacity

3. These Swivel Joints are provided with dual packing arrangement. Primary seal with stainless steel anti-extrusion ring and an additional O-ring between ball races and primary seal is provided, which acts as a secondary seal. When leakage occurs, it is diverted through the leak detection port. A leak at this port indicates the necessity of primary seal replacement

4. The grease retainer is self-relieving to prevent pressure accumulation in the ball race chamber if leakage occurs through the secondary packing

Contact Us

Your Name

Your Email ID

Mobile No.

Subject

Message